Technical Data
Product Information
DAA
IDPA PDR PRO-II Holster for Pistol with Red Dot Optic (RDO)
A close-to-body sporting holster with bare Kydex: because the shell has no suede lining, DAA says the gun is released quickly and smoothly. You set the retention from the outside, even while the holster is worn, and the belt hanger is tilt-adjustable and works for right- and left-hand holsters alike.
The DAA IDPA PDR PRO-II combines the current unlined PDR PRO-II Kydex shell with a compact Belt-Ride hanger. The result is a close-to-body sporting holster for IDPA, range use and general carry.
Unlined Kydex shell: DAA intentionally omits the suede lining on this version. Draw resistance can be tuned with one or both externally accessible Phillips-head screws without removing the holster from the belt.
Belt-Ride hanger: It keeps the holster shell close to the body and gives a solid yet tilt-adjustable connection. It fits belts 1.5–2.0 in (3.81–5.08 cm) wide. Spacers can be placed above the belt, below it or split between both positions, giving a limited amount of height adjustment. The hanger is ambidextrous; the Kydex shell is supplied for the selected right- or left-handed version.
Choosing the right version: DAA offers separate shells for the firearm families shown in the selection field. Firearm model, generation, barrel length, sights and other modifications must match the selected version.
Adjustment and safe use:
The IDPA PDR PRO-II from Double-Alpha Academy (Waalwijk, Netherlands; founded in 2002 as an IPSC school) combines the latest PDR PRO-II Kydex shell with a Belt-Ride hanger. According to DAA it is a good choice for IDPA competitors as well as for general carry and range use.
- Bare Kydex shell
The PDR PRO-II shell is used here without the suede lining; according to DAA bare Kydex is hard to beat for speed, quick release and a smooth draw.
- Tension adjustable from the outside
Draw tension is set with one or both Phillips-head screws, which can be reached from the outside while the holster is worn.
- Belt-Ride hanger
The hanger positions the holster up close against the body and gives a solid, tilt-adjustable mount.
- For belts from 1.5 to 2.0 in
Fits belts 1.5 to 2 in (3.81 to 5.08 cm) wide. The belt spacers can be placed above, below, or one on each side of the belt, which gives some height adjustment.
- Right- or left-hand
The hanger is fully ambidextrous; available for right- and left-handed shooters, in black only.
- Carry method
Belt holster with a Belt-Ride mount close to the body; according to DAA for IDPA as well as general carry and range use.
Material and craftsmanship
Firearm-specific Kydex shell without suede lining, finished in black.
Available configurations
Compatible firearm models
Glock
- 17Gen 1
- 19Gen 2
- 22Gen 2
- 23Gen 2
- 29
- 31
- 32
- 34Gen 3
- 35Gen 3
- 37
- 38
- 41
- 45Gen 5
Sig Sauer
- 1911 Max
- P226
- P226 X5
- P226 X6
- P228
- P320
- P320 RX
- P320 X5
- P320 X5 Legion
- P320 X-Carry
- P320 X-Vtac
Tanfoglio
- Limited
- Limited Custom
- Limited Custom Extreme
- Stock I
- Stock II
- Stock II Extreme
- Stock III
- Stock III Extreme
- Stock III P
STI
- DVC 3-Gun
- DVC 2011
- DVC Carry
- DVC Limited
- DVC Omni
- Edge
- Tactical
CZ
- 75 SP-01
- Custom Shadow 2
- Shadow 2
- TS 2
Smith & Wesson
- M&P4¼" · 5"
- M&P 2.04¼" · 5"
- Performance Center C.o.r.e.
- Performance Center M&P4¼"
Springfield Armory
- XDM3.8" · 4½" · 5¼"
- XDM Compact3.8"
BUL Armory
- 1911
Grand Power
- X-Calibur
Heckler & Koch
- USP
Rock Island Armory
- 1911
Staccato
- C
Further makers
- Canik
Further models (maker not assigned)
- 1911 GOVERNMENT
Scope of delivery
- IDPA PDR PRO-II holster with firearm-specific Kydex shell in the selected hand version
- Belt-Ride hanger (ambidextrous)
- Belt spacers for the belt width
Notes
- Select the exact firearm model and hand; test the fit only with an unloaded pistol.
- According to the DAA compatibility list some fitting may be needed on 1911 Government pistols; for the H&K VP9 the Kydex must be moulded. Reshape only where DAA provides for it for the specific model.
- The S&W M&P 2.0 Competitor is not supported according to DAA.
- Check screws and belt hanger regularly for tightness; before sporting use confirm that the pistol is held securely and can be drawn without binding.
- For the most harmonious overall look, we recommend choosing leather holsters and leather accessories from the same manufacturer in the same colour designation. Leather is a natural material; slight variations are possible even within one colour. Colour names such as brown, tan, cognac or natural are not standardised across manufacturers.
* Firearms, optics, magazines, ammunition and accessories shown are not included unless expressly stated. The selected article variant applies.
DAA
