Technical Data
Magnifier · 3x · flip-to-side
Sightmark T-3 Magnifier 3x with LQD Flip-to-Side Mount
3x magnifier to mount directly behind a reflex or red dot sight, with a flip-to-side mount that swings to the side and a locking quick-detach lever.
Product
This product is the T-3 magnifier (SM19063) with 3x magnification. It is a magnifier, not a sight: it is mounted behind an existing reflex or red dot sight. The sight is not included.
Features in practical use
3x magnification
Fixed 3x magnification, 23 mm objective, 7.6 mm exit pupil; field of view 14.43 m at 100 m (43.3 ft at 100 yd).
Eye relief and diopter
Eye relief 57 mm (2.25 in); diopter adjustment from +3 to -3.
Flip-to-side mount
The mount swings to the right or left when the magnification is not needed; according to the manual the side is set during mounting and the flip tension is adjustable.
Locking quick detach
The LQD lever with lock releases the Picatinny mount for quick removal; the clamping width can be adjusted with a nut on the side.
Reticle alignment
External elevation and windage adjustment (by hand, without clicks) centres the sight's reticle in the magnifier's field of view; the sight's point of impact does not change.
Housing
Aluminium, fully multi-coated, IP55 water resistant, recoil rated up to .308; 103 × 66.2 × 42.5 mm, 30 mm tube diameter.
Scope of delivery
- Flip-to-side LQD mount
- Adjustment tools
- Manual
Matching items
For use behind a reflex or red dot sight; Sightmark states the mount is compatible with EOTech® and Aimpoint® and provides for a Picatinny rail. The sight and the firearm are not included.
* Firearms, mounts and other accessories shown are not included unless expressly listed. The selected item variant and the described scope of delivery are decisive.
Sightmark
